The setup and installation of SmartFeeder takes just a few minutes.
1. Download Petnet App
To configure your SmartFeeder, you’ll need to download the Petnet App. It is available on the Apple App Store and Google Play.
2. Create your Petnet account, register your pet and food
Follow the directions on the Petnet App to create your user account, add you pet’s profile and register your food.
3. Power on the bowl
The power switch is located on the rear right side of the bowl. Once powered on, the red LED on the front left of the bowl will blink on and off.
4. Connect bowl with you phone
The power witch is located on the rear right side of the bowl. Once powered on, the red LED on the front left of the bowl will blink on and off.
5. Connect SmartFeeder to Wi-Fi
The Petnet App will guide you through each step using a proprietary blinking process to connect with your bowl.
6. Set up your SmartFeeder
Place the stainless steel bowl insert on top of the bowl. Slide the bowl into SmartFeeder housing as shown below. Connect A/C adapter to wall outlet.
7. Add food to hopper
Pour food into the hopper and fill it, leaving a 1 inch clearance at the top.
8. Congratulations! You’re all set up.
Use the Petnet App to set up feeding times and portion sizes.
Feeding will never be the same.